This page last updated November 28th 2008

Please use these links to access our site. These and further links for other general categories and an expanded list is also in the blue navigation panel on the left hand side.

Products Services Etching Transfers / decals Future products Price list Contact us

VR Narrow Gauge NQR Wagon parts in 1/4"

internal rivet overlays for the "Ian Lindsay Models" NQR resin kit


This project follows on from Steam And Things project for the PB coaches.

Etched overlays are available to the fine modeller who wishes to detail the inside of his open wagons:


Drawings : Steam And Things, Copyrighted

The overlays are made from 0.3mm brass half etched to give lines of rivets. The riveting is such that it marries up with the riveting on the outside of the resin side or end. The overlays are made slightly oversize to accomodate any variation in sizes.

Each fret is for one wagon, viz. 2 sides and 2 ends. We price per fret for one wagon at $13.50 per wagon, plus postage

The above drawings are our interpretation of what we have seen, photographed and discussed with staff at Belgrave and Emerald up at Puffing Billy. If there are considered shortcomings - ie. the need to the inclusion of etched strip with rivets, then we will certainly consider this addition.


Photograph: Ian Johnston


Please use these links to access our site. These and further links for other general categories and an expanded list is also in the blue navigation panel on the left hand side.

Products Services Etching Transfers / decals Future products Price list Contact us

Home Page